Analysis of corrugated box equipment in East China

2022-10-23
  • Detail

Analysis of corrugated box equipment in East China (II)

3. Plate making machine

the place of origin of plate making machine in East China is dominated by the mainland, but it also has a 17% share in Zhejiang, Europe, the United States and Japan. The proportion of products from Shanghai and Taiwan in East China is the highest, at 8%. With the continuous progress of technology, the market share of mainland products will continue to rise

in terms of the number of plate making machines, Shandong Province ranks first in East China at 32%, followed by Zhejiang at 27%, Jiangsu and Henan at 16% and 10% respectively, and other provinces are in single digits. Shandong and Zhejiang, as major packaging provinces, have a large demand for prepress equipment, so their quantity proportion is high

4. Situation of plate washing machines

the number of plate washing machines in East China is 35% in Zhejiang, 29% in Shandong, 19% in Jiangsu, and the others are in single digits

the origin of plate washing machine is mainly in the mainland, with the highest proportion of 96% in Jiangxi. Different from South China, the proportion of products from Taiwan, China in East China is very low, and the highest proportion is only 6% in Shanghai. The proportion of European, American and Japanese products in this region ranks first in the country, reaching 22% in Shanghai, and 19% and 17% in Shandong and Zhejiang respectively. This is because flexo is the first link of printing quality, and the plate washing machine is in a key position in the flexo production process. It encourages and guides leading enterprises to play an exemplary and leading role in the transformation and upgrading. The technical requirements are high, which plays a key role in the quality. Therefore, the import proportion is relatively high, with Japanese machines as the largest

5. The situation of automatic printing slotting die cutting gluing (nailing) box linkage lines

in East China, the number of automatic printing slotting die cutting gluing (nailing) box linkage lines in Zhejiang is the highest, 28%, followed by Jiangsu is 26%, Shandong and Shanghai account for 17% and 16% respectively, and the others are single digits

except that Anhui, Jiangxi and Henan are dominated by mainland machines, other regions are dominated by products from Taiwan, China, of which Zhejiang accounts for the highest proportion of 44%. In Shanghai and Zhejiang, the proportion of European, American and Japanese products is only lower than that of Taiwan, China products, reaching 36% and 32% respectively. This is very different from the low proportion of European, American and Japanese products in South China, especially the highest proportion of Guangdong, which is only 9%. This is because the linkage line is a high-end product with high technical content, so most enterprises tend to buy products from Europe, the United States, Japan and Taiwan, China with better quality

the proportion of linkage line speed in Anhui, Jiangxi and Henan is mainly less than 100 pieces/minute, while in Shanghai and Shandong, it is 100-200 pieces/minute as the mainstream, of which Shandong is the highest up to 53%. Zhejiang and Jiangsu have more than 200 sheets/minute, accounting for 43% and 39% respectively, which is much higher than the 23% proportion in South China

the proportion of color groups in East China is balanced, with color as the mainstream, and it reaches 100% in Anhui. In Shanghai, the proportion of more than 4 colors is also very high, reaching 33%, while Shandong and Zhejiang are slightly lower, accounting for 15% and 14% respectively

6. Printing slotting die-cutting machines

in East China, the proportion of printing slotting die-cutting machines in Zhejiang is the highest, 24%, followed by Jiangsu and Shandong, 21%, Shanghai and Anhui, 11%, Henan, 9% and Jiangxi, the lowest is only 3%. The level of the whole East China is relatively balanced, which shows that there is little regional difference

printing slotting die-cutting machines are mainly produced in the mainland, accounting for 92% of the total in Jiangxi and Henan. In Taiwan, China, Zhejiang Province, there is also a certain market proportion of products, which is 13%, and the highest proportion of products from Europe, the United States and Japan in Shanghai is only 9%. Although the current equipment is mainly from the mainland, the proportion of products from Europe, the United States, Japan and Taiwan, China will continue to rise in the next few years

the speed ratio of printing slotting die-cutting machines in Henan, Shanghai and Jiangxi is mainly below 100 sheets/minute, and the highest speed in Henan is 89%. In Jiangsu, Zhejiang, Shandong and Anhui, the mainstream is 100-200 sheets/minute, with the highest rate of 65% in Jiangsu. The proportion of more than 200 pieces/minute in Jiangsu is also up to 14%, which is higher than 11% in Guangdong

the proportion of color group of printing slotting die-cutting machine is less than 3 colors, of which the highest in Anhui is 82%. Henan and Shandong are mainly 3-4 colors, of which the highest is 81% in Henan. Only Jiangsu and Shanghai have more than 4 colors, but the proportion is very low, and the highest Jiangsu only accounts for 3%

the start-up rate of printing slotting die-cutting machines in East China is higher than that in other parts of the country, of which Anhui and Henan are the highest, accounting for 83%, and Shanghai is the lowest, accounting for only 66%

7. Situation of printing slotting machines

in East China, the highest proportion of printing slotting machines is 28% in Zhejiang, followed by 21% and 20% in Jiangsu and Shandong respectively, and 12% in Shanghai, and the rest are in single digits

the printing slotting machine is mainly produced in the mainland, up to 99% in Henan, 97% in Jiangxi and 96% in Anhui. Taiwan, China products in this region also have a certain market share, but the proportion is not high. Even the highest one in Zhejiang Province accounts for only 9%. European, American and Japanese products account for a small proportion in this region, of which Jiangxi has no European, American and Japanese products at present

Independent system standards can also see the shadow of the above standards more or less

the start-up rate of printing slotting machines in East China ranks at the highest level in China, mainly due to the high utilization rate of machines, which is an essential link in the production process. The speed ratio of printing slotting machine is mostly below 100 sheets/minute, but it is mainly 100-200 sheets/minute in Shanghai, Jiangsu and Zhejiang, reaching 62%, 57% and 55% respectively. This shows that the printing slotting machines used in this region are relatively advanced among domestic equipment, so their overall speed is relatively high

in Henan, Anhui, Shanghai and Jiangsu, the color group proportion of printing slotting machines is dominated by color, and the highest proportion in Henan is 58%; In Jiangxi, Shandong and Zhejiang, it is dominated by less than 3 colors, with the highest proportion of 74% in Jiangxi. The proportion of more than 4 colors is very low, and the highest in Jiangsu and Zhejiang is only 3%, which is still a big gap compared with South China, where the proportion is very high

8. Printing press situation

the proportion of printing presses in Zhejiang is the highest, with 29%, followed by 23% in Jiangsu, 19% and 11% in Shandong and Shanghai respectively, and the others are in single digits

the printing machine is mainly produced in the mainland, especially in Jiangxi, 100% of which are mainland equipment. The proportion of products from Taiwan, China is very low, with only 4% being the highest in Zhejiang. Only Shandong has European, American and Japanese products, but it only accounts for 1%. In general, this is because the printing press is a low-grade product, the machine replacement frequency is high, the update is fast, and the products are locally produced and sold to the maximum extent, so most enterprises tend to buy low-priced mainland products

the starting rate of printing machines in East China is far lower than that in South China, which is equivalent to that in North China and other regions. Although the highest is only 69% in Anhui, the lowest is 61% in Shanghai. The development of the whole East China is relatively balanced, with little difference compared with other regions. The overall low startup rate indicates that the equipment of many enterprises are 9. If it is a lower type, it will be simple. It has been idle, and the utilization rate is gradually declining. Most of them are developing in the direction of more advanced printing slotting machines

the speed ratio of printing machine is less than 100 sheets/minute, which is as high as 90% in Jiangxi. However, in Shandong Province, 100-200 tickets/minute can account for 35%, while in Anhui and Zhejiang, slightly lower ones can also account for 34% and 32%. This is because many early state-owned enterprises in the region used this equipment, so the overall speed is relatively low

The proportion of

color group is mostly below 3 colors, which is the most obvious in Jiangxi, accounting for 85%. However, in Anhui Province, color is dominant, accounting for 57%. Only Jiangsu and Zhejiang have more than 4 colors, but the proportion is very low, both of which are 1%. This is because the proportion of color decks with more than 4 colors required by users is relatively small, and the color decks with the highest color can basically meet the needs of East China

9. Prepress situation

at present, the vast majority of prepress machines are domestic. The main reason for this is that the domestically developed equipment has basically met the printing requirements, and after the accuracy of the experimental machine is found, the imported equipment is slightly better in quality, but its price is very expensive, so domestic equipment is still the first choice

prepress is a new technology, which adapts to the limitation of quantity of products, so the enterprise has very little. At present, there are only Shandong, Zhejiang, Jiangsu and Henan in East China, of which Shandong accounts for the highest proportion, 34%. There is no prepress machine in Shanghai at present, because there is no such demand for the time being; The reason why Shandong has the highest proportion is that there are many beer production enterprises in the province, so the demand for pre printed cartons supporting them is rising

the prepress speed in East China is divided into two parts, of which Jiangsu and Henan are less than 100% 100 meters/minute, while the other half of Zhejiang and Shandong are 100-200 meters/minute

the proportion of prepress color group in East China is mainly color, with Jiangsu and Henan reaching the highest of 90%, followed by Zhejiang and Shandong at 85%. The highest proportion is 15% in Zhejiang Province with more than 4 colors, while there is still 15% in Shandong Province with less than 3 colors. There is still a big gap between this and South China, where more than 4 colors are dominant

the power on rate of prepress in East China ranks first in the country, with the highest rate of 62% in Shandong and the lowest rate of 42% in Henan. Although the startup rate is higher than that in other regions, it is still low on the whole. This is mainly caused by the fact that there are few large orders from downstream users, and large orders are required for the startup of the prepress, resulting in a relatively high idle rate of the prepress

10. Die cutting machine condition

the starting rate of die cutting machine in East China is higher than that in South China, which is basically the same as that in North China and other regions. Among them, Zhejiang and Shandong have the highest proportion, both of which are 71%. The proportion of die-cutting machines is 28% in Zhejiang, 23% in Jiangsu, 18% in Shandong and 12% in Shanghai, and the rest are in single digits

in East China, the origin of die-cutting machines is mainly in the mainland, especially in Anhui and Jiangxi, which is as high as 99%. Taiwan, China's product share is small, and the highest in Jiangsu is only 3%. The proportion of products from Europe, the United States and Japan is very small, and the region it owns only accounts for 1%

die cutting is dominated by the flat pressing square type with high precision. In Jiangxi, Jiangsu and Shandong, the proportion of round pressing with high speed and relatively low accuracy is also very high, 26%, 25% and 25% respectively

11. Nailing machine situation

the startup rate in East China is similar to that in other regions, but it is far lower than that in South and North China, and the highest is only 71% in Zhejiang. This is because the box nailing machine is a low-end product. In addition, users rarely use special-shaped boxes and mostly use standard boxes, so the efficiency is very high, so the startup rate is low

the proportion of nailing machines in Zhejiang is the highest, accounting for 28%, followed by Jiangsu, accounting for 23%, Shandong, 21%, and the rest are in single digits. The production area of box nailing machine is mainly in the mainland, and it is as high as 99% in Jiangxi. In Jiangsu and Zhejiang, products from Taiwan, China can account for 5%, while products from Europe, the United States and Japan are only available in Shanghai, Jiangsu, Zhejiang and Shandong, but the proportion is very low, both of which are 1%

12. Box gluing machine

the startup rate of box gluing machine in East China is basically equivalent to the national average level, which belongs to the normal category. And the difference between Anhui, the highest, and Jiangxi, the lowest, is not very large, one is 73% and the other is 59%. This is because the scrap rate of the carton glued by the carton gluing machine is higher than that of the carton nailing machine, so many enterprises do not choose the carton gluing machine if they can nail the carton

Copyright © 2011 JIN SHI